In the simulated simulated climate environment test equipment, the high and low temperature damp heat test chamber is used in the inspection of high temperature, low temperature resistance, dry resistance and waterproof quality in electronic devices, electric welders, auto parts and metal manufacturing industries. In its key system consisting of humidifier, heating, cooling, maneuvering, etc., the key basic principle of the humidifier is to change the water into a hot water flow, and then to control the environmental humidity in the experimental box. Therefore, the installation of the high-low temperature damp heat test chamber humidifier system software I think is the installation of the humidifier tap water. The installation method of high and low temperature damp heat test chamber is given:
1. Introduce the storage tank into mineral water or purified water (do not apply drinking water, etc., in case the application causes blockage, the tester can not operate normally), and it can only be added to about eight minutes;
2. Check whether the maintenance valve is related (close to the vertical direction of the water pipe);
3. After the switch power supply is properly closed for about 3 minutes, warmly remind the supplementary water storage tank and the water level line of the liquid level controller to maintain more than half of the water level line anytime and anywhere (the water level line is seen directly below the machine front).
4. Adding tap water to the humidifier. When the water level is not enough, introduce pure water or purified water into the water storage tank, and use a small water pump to pump to the water supply tank for the automatic water circulation system tap water.