Dongguan Hongtu Instrument Co.,Ltd
+8613553813526
News
Current Location:Home > News > The load generated by the high and low temperature damp heat test chamber during the test

The load generated by the high and low temperature damp heat test chamber during the test

Author: Source: Posted On: 2019/8/30 9:56:20

 The load commonly used here is: the test sample is used to generate heat during the operation of the high and low temperature damp heat test chamber, and the heat is absorbed and absorbed during the high temperature operation; Affect the actual effect of the inspection of high and low temperature damp heat test chambers.

 

Usually, the manufacturer will have a unique solution to the heat value in the design concept and product development of each high and low temperature damp heat test box. In order to ensure the high and low temperature damp heat test chamber, the ultra-low temperature can be operated smoothly for a long time. At the time of ultra-low temperature, the refrigeration system software will be paired according to the size of the heat generated by the test sample. Normally, each high temperature and low temperature damp heat test chamber with a temperature of -60 degrees is fully loaded, in fact, it can guarantee -63 degrees or even -65 degrees, but we are not fully loaded when using, we will place experiments more or less. The test sample, and the user usually has no definition of the heat value of the wood after the test sample is loaded. In order to prevent the temperature from reaching up, falling out, or slowing down the temperature of the elevator, we It is proposed that when introducing equipment, the calorific value should be specified, or the material, net weight and size of the test sample should be told to the manufacturer, which would reasonably assist the test, so that the actual effect of the high-low temperature damp heat test box is better.

 

Customer satisfaction is the service tenet of our service project. Sound after-sales maintenance service allows you to eliminate any concerns. We are convinced that a good company sells not only every good product, but also the excellent service project.

 

1. Professional technical training: practical operation and application, normal maintenance, mechanical failure inspection and removal;

 

2, on-time telephone return visit: machine equipment safety inspection, fault detection security risks, transmission of the latest developments;

 

3. Special reserves for spare parts and accessories are applicable;

 

4. The after-sales service center showed that the after-sales service was not responding quickly;

 

5. Occupational maintenance personnel ensure immediate and reasonable fault detection.



Copyright © Dongguan Hongtu Instrument Co.,Ltd GoogleSitemap